As a trader specialising in 6mm scale figures I spend a lot of time at conventions talking to wargamers on the subject of painting figures. Many are experienced collectors in this scale wanting to know if I have any tips that I can pass on. However, very large numbers are individuals who peer at my wares, screw their eyes up and frighten themselves to death at the prospect of getting the right types of facing loops on castings which are so small. There then follows a series of ritual responses that goes something like this:

WARGAMER: Hail, honest trader! How do you do those? I couldn't possibly paint anything so small!

HONEST TRADER IN FINE SMALL SCALE WARGAMES FIGURES: It's a lot easier than you think. Believe it or not, they are easier to paint than larger scale figures.

WARGAMER: Scallywag! Capon! Poltroon! You will tell me anything! I have enough trouble painting 25mm figures never mind these. It takes me two months to paint twelve infantry for one battalion.

: Seriously, these are easier to paint than bigger models and you can do it quickly too. This regiment of three hundred English Civil War figures only took me three nights to do.

WARGAMER: Hah, Tricky Cockscomb and Vile Rogue! Got you! You are telling porkies big time in an attempt to inveigle me into buying some of your fine wargames figures. No one could paint that many figures that quickly. I shall leave you and not look behind me! Rotare me Satanus! A pox on you and yours, yea even to the fifth generation! Returnest thou to selling double glazing to gullible fools! I was not born yesterday etc. etc. (Exits stage right.)

HTIFSSWF: Did I say something wrong?

What we have here is a classic case of misunderstanding. Comments about perceived inability to paint small scale figures or speed of painting always come from people transferring their experience of painting 25mm or 15mm figures directly to the smaller scale.

What they fail to realise is that painting 6mm castings requires a rethink of techniques and methods of applying paint. As opposed to producing pieces of military sculpture on wargames bases, we are attempting to create an overall effect of a large body of men and are therefore aiming to emphasise only those features that can be picked out from a viewpoint of over a metre away from the figures. It may be personally satisfying to paint tiny belt buckles and musket locks but it isn't going to get your army painted quickly and who the hell is going to see it anyway?

The other classic mistake is the constant reference to 6mm figures. Most manufacturers supply their castings ready-based on strips, and it is these that represent the unit of production. For example, if you paint a small unit of Napoleonic Line Infantry, you are producing eight strips (each holding four figures), not thirty two individual figures.

I am not an expert painter and regard myself as being totally unskilled. However, more than any other scale 6mm lends itself to applying painting techniques rather than the exercise of skill in order to get acceptable results. My personal aim is to spend as little time as possible with a paintbrush in my hand, as life is too short to be chained to a table crammed with paints and pots of water.


These are the subject of some controversy. In the old days wargamers always used enamel paints, while the more arty military modellers used oils. Some sad individuals in both camps still do. We are lucky enough today to be surrounded by a multitude of organisations and individuals who will be only too happy to supply us with a kaleidoscopic array of water-based acrylic paints at the drop of a few shekels.

Let me lay out the options for you:
Oil paints require you to muck about with turps or white spirit. They are messy and impossible to clean when spilt, are very smelly and take an interminable time to dry, thus slowing the painting process dramatically. On the other hand they do allow subtle and fine blending of tones and shades, and are the preferred medium of fine artists.

Enamels take only slightly less time to dry than oils, but are just as messy and you can never lever the top off those damn tinlets after you've used them once. However, they are good for painting models of classic steam locomotives.

Acrylics are water based, easy to use and will mix with a wide range of other water based paints and inks. They are easy on your brushes, quick to dry, make the painting of large numbers of figures simple and are the preferred choice of all right thinking people who value freedom of expression and independence of thought, and would like to finish painting a wargames army occasionally.
Your choice!

I have a collection of paints from a range of sources, but am gradually going over to using artist's tube acrylics as they offer a vast range including metallics, and work out cheaper than buying paint in little glass or plastic bottles.


These are vital tools. My personal collection ranges from a size 1 to a 15mm household paint brush. Always buy the best quality that you can afford. It is no use attempting to paint fine detail with a brush nicked from a five year old’s paint box. There is also little real value to be gained in buying anything small than a size 0. If you invest in a good quality brush the fine tip cannot be bettered by anything smaller and the ability to carry a decent consistent paint payload is greatly enhanced. Do not take any notice of the sad man who tells you that he has the world’s largest collection of micro-sized mono-bristle brushes. You can get better effects than he can, and you won’t have to wear an anorak.

Painting Bases
The secret weapon in the struggle to paint castings quickly. These are strips of plywood, hardboard or MDF measuring about 200mm by 20mm. First tack (lightly glue) your strips to the base lined up side by side facing the same direction in one long line. The base now provides you with something to hang on to while painting the castings without having to fiddle about holding individual strips.


I will use as an example a French battalion from the Marlburian period. This will consist of 192 figures based on groups of four, giving me 48 strips. To start I will have tacked these on to six painting bases each holding eight strips, plus one holding the various command elements.
Painting should be done in a series of layers, starting with the dominant colours and working outwards. Each successive layer should require you to apply paint with more care and attention, as the final few layers will decide the 'look' of the finished article. You should aim to apply each colour once only.

1. Undercoat

This layer provides a key for your top layers of paint. While some people swear by white as a base colour, I use black, and the rest of this guide is based upon this premise. I tend to paint a lot of strips at once so I use spray car paint which covers well and dries quickly. If you do the same, please remember to wear a mask unless you want an interesting extra stratum lining your lung walls. Once the undercoat is dry we are ready to move to the job proper.

2. Light Grey

The French Infantry in this period wore a light grey coat, and this colour is applied first as it is the dominant uniform colour. It always pays to use a lighter/brighter shade than the original on small scale figures. This is for two reasons. Firstly the black undercoat will have a dulling effect, and secondly you have far less surface area on a 6mm figure so you need to be a bit bolder to get the colours to stand out.
This coat should be applied as a drybrush. To those of you who don 't know about or have not yet mastered this technique, it is well worth having in your armoury. You need to have a stiff paint mixture (another advantage to using tube acrylics), and to load this on to a fairly broad brush. Dry your brush off on a piece of kitchen paper, and then run the bristles along the surface of the strips, leaving a deposit on the raised areas, allowing the black undercoat to show through to provide relief and detailing. If your figures are properly detailed, this single coat will effectively define your progress for the rest of the job.

3. Brown

Using a fine brush paint in the hair, (everybody in my armies has brown hair!), and the musket.

4. Facing Colour

In this case, a bright red applied to the cuffs and the socks. To paint the latter, just run the brush laterally along the legs from left to right and front to back. Don't worry about overspill from the cuffs on to the hands as this will be tidied up by the next layer.

5. Buff

You need to take a bit of care with this one as you have a straight line to paint. In this case, we must add a cartridge box and baldric and sword scabbard. There is a waist belt defined, but I never bother to do this, as I am not a purist.

6. Flesh

Self-explanatory. Note that where the black undercoat is left to show through it helps define edges and shading.

7. Black


8. White

The white neck cloths tidy up the figures and make them look much more military.

9. Yellow

The hat lace. It is worth taking some time over these details, as they are the things that catch the eye from a distance. I have to admit that this is the slowest and most tedious part of the process.

10. Silver

Musket barrels. Silver rather than gun metal, because it is flashier and looks better.

Some of you are more familiar with large scale figures may think that these images look a little rough. Remember that they are shown at twice actual size. The finished version is actually this size ....

There you are, a job well done. Of course you can add more detail such as shoulder straps, piping, facial hair, buttons and so on, but is there any point? These things are important in a large scale figure which is why painting the damn things is so time consuming. Down among the midgets such attention to detail only brings you up against a savage and unforgiving Law of Diminishing Return.

While all the main action is going on you can be spending a bit more time on the sundry officers, ensigns and drummers that will litter the place. It is perhaps worth taking a bit more care with these chaps as they are the individual figures that your peers will be drawn to look at, and complement you on your painting skills.

You can add a final layer of varnish; matt, eggshell or gloss. May I recommend a trip to a DIY store and an investment in a BIG tin of household polyurethane varnish. It works out cheaper than buying dinky pots of the stuff from modelling suppliers and armour-plates your little pride and joys.

One important aspect which if often overlooked, is how to BASE your painted figures.

This is my least favourite subject as I cannot paint horses. Here is how I go about it. (Real painters can avoid this section.) Firstly most horses are brown - well, most of mine are. Apply dark brown to almost every horse that you are painting. Mix a darker brown shade, almost black, and apply to all lower legs, manes and tails. Leave to dry.
Paint any whites or greys by applying the appropriate colours. Duns should be a biscuit/buff colour. The former can have grey manes, tails and lower legs, the latter black.
Once the first layers are dry, use white to apply socks at random and add stripes or stars to the front of the head. This will have the effect of breaking up the solid mass of brown and applies some individuality to the beasts. It is simple and it works.
Painting the riders is done using the layer technique. If you are painting dark horses you can get away without painting the tack unless you are really inclined to do so.

It is important to get these looking good, as they are the things that will really catch the eye. Be big, be bold, be brassy and bring out the main features that can be seen from a distance. It doesn't matter if you cannot get the right number of talons on your rampant frog, or if you dispossess the Union of some states on the star-spangled banner - it is the overall effect that counts.
Of course you can always cheat and use some of the pre-drawn, pre-coloured flags produced especially for 6mm figures by Baccus 6mm.

If you have followed these instructions to the letter for the first time you will have combined your skill as a painter with the designer's as a sculptor to produce a masterpiece - alternatively you will have something that looks like a messy if microscopic traffic accident. If the latter, the motto is to keep on trying, as we all know what practice makes don't we children?

As usual having written this piece I find it hard to believe that anyone cannot have been swayed by my powerful arguments and impeccable logic. It only goes to show the powers of self-delusion. For the record, the 192 figures for the battalion in this example were painted in a couple of two hour sessions. By the time you add a few extras in for officers, adding flags and basing (excluding drying time), the whole project took a few minutes over five hours. That works out at a rate of less than two minutes per figure.

There really is only one way to find out if I am really telling the truth about the ease of painting of 6mm figures, (and note there was not one single mention of a magnifying glass in this guide). Have a go yourself. If you are still saying, 'but I can't possibly paint anything so small...', how do you know if you have never tried?

Painting scenery
Once you have got your little warriors on to the tabletop you have to make a Little World for them to squabble over. You order the miniature real estate and natural history from the nice man in Sheffield, and then scratch your head. 'I can't possibly paint anything so small...'
Here we go again!

I'll start by repeating the gist of what I have said about painting little men. Remember that you are painting for effect. Imagine what the eye will be able to pick out at three feet and concentrate on that. There is no need to worry about painting every individual plank, hinge, wheel spoke and brick. The techniques that I concentrate on involve a judicious use of well-chosen colours and lots of highlighting and drybrushing.

Okay, not every casting that I produce is absolutely perfect. (I admit it, most don't.) You may find the odd air bubble, mould flaw or bit of flash. You may therefore need to do some work cleaning up the casting prior to painting. How much work you do is up to you. Filing off rough edges and making sure that multi part castings fit together is recommended. Filling in every last air bubble is not. Remember the three-foot viewing rule.
Once you are happy with the castings assemble the models and undercoat them. As with figures I start from a black undercoat. Also as with figures I tack smaller models on to a long stick to provide a handle during the painting process.

Apply a general light grey drybrush. This can either act as a topcoat if you want the walls to be that colour, or as a key for successive layers. If you want a brick or tile effect, use a terracotta red at this stage.Leave to dry.

Apply a topcoat of the chosen colour, but try and leave a thin line of the black undercoat showing thorough around the doors and windows. For half-timbered buildings line in the frames with black brown. If you want to be flash with bricks and tiles, wash some ink was over the model. This runs into the all the courses and gives a lovely effect. If you want to be even flashier, pick out the odd brick, or course or group of bricks in the original colour to give a slight unevenness to the finished product. It does look good.

Paint window panes with a dull silver or gunmetal. Some of the Baccus models have half-leaded panes and these can be emphasised by a thin wash of black ink. You should note that if you are painting churches stained glass is designed to be seen in its full glory from the inside of the building and it looks pretty dull from the outside.

Finish off by painting all doors, door frames and window frames.
The roof should be treated in a similar fashion, with the use of inks and washes to bring out tiles and slates. Remember that thatched roofs are generally done with reed which is grey not bright yellow. Even straw thatching loses its colour very quickly.

Gabions, fences, gates and assorted woodwork.
These are all very simple, but you must bear one point in mind. Once wood has been exposed to the elements it turns a greyish colour not light brown. Honest.

Getting a realistic wood effect is a snip. Drybrush light grey and watch the detail emerge from the black undercoat. On gabionage run the brush against the grain of the weaving and the gabion will appear as if by magic.
The trick with all of this is to apply paint at a shade or two brighter than you would expect to use on 15mm or 25mm scale models. You have far less surface area with which to make you colour statement, so you need to be bright and bold. It is the CONTRAST that defines how the model appears.

These techniques are very personal, and I may take the skills and experience of the reader for granted. All I can say is that they work for me, and are VERY quick. If you find it hard going at first, persevere and you will soon find it comes good. If you can't get on with any of this, and I know a lot of people are very uncomfortable with black undercoat then please share your techniques and experience with others on the site Bulletin Board.

Happy Painting,




ANZAC cove 1915 by Nick the Lemming
23rd Feb 2018

NW Frontier 1897 by ironass
22nd Feb 2018

ECW generic flags by peter
22nd Feb 2018

Great War Redoubts by LEmpereur
21st Feb 2018

Polemos FPW by Romulus
16th Feb 2018


Hammerhead (Newark Showground)
3rd Mar 2018

Salute (Excel Centre, London)
14th Apr 2018

Partizan (Kelham Hall, Newark)
20th May 2018

Phalanx (Sutton Leisure Centre, St. Helens)
16th Jun 2018

Joy of Six (Sheffield)
15th Jul 2018


Great War British - Desert Mounted CorpsGreat War British
Desert Mounted Corps

Great War Indian - Indian Army Division PackGreat War Indian
Indian Army Division Pack

GWE15 - Indian 2.5GWE15
Indian 2.5" RBL and crew

GWE13 - Indian cavalryGWE13
Indian cavalry

GWE12 - Indian Vickers Guns and crewGWE12
Indian Vickers Guns and crew